Difference between pages "How to Make Sugar from Sugar Cane" and "How to Use Photovoltaic Energy"

From Howtopedia - english
(Difference between pages)
Jump to: navigation, search
(→‎Sugar Production from Sugar Cane)
 
(→‎Solar Photovoltaic Energy - Technical Brief)
 
Line 1: Line 1:
−
==Short Description==
+
=Solar Photovoltaic Energy - Technical Brief=
−
*'''Problem:'''
 
−
*'''Idea:'''
 
−
*'''Difficulty:'''
 
−
*'''Price Range:'''
 
−
*'''Material Needeed:'''
 
−
*'''Geographic Area:'''
 
−
*'''Competencies:'''
 
−
*'''How Many people?'''
 
−
*'''How Long does it take?'''
 
  
−
=Sugar Production from Sugar Cane=
+
==Introduction==
  
−
==The basic process==
+
<div class="booktext">
 +
 
 +
Photovoltaic (PV) is a technology that converts sunlight directly into electricity. It was first observed in 1839 by the French scientist Becquerel who detected that when light was directed onto one side of a simple battery cell, the current generated could be increased. In the late 1950s, the space programme provided the impetus for the development of crystalline silicon solar cells; the first commercial production of PV modules for terrestrial applications began in 1953 with the introduction of automated PV production plants.
 +
 
 +
Today, PV systems have an important use in areas remote from an electricity grid where they provide power for water pumping, lighting, vaccine refrigeration, electrified livestock fencing, telecommunications and many other applications. With the global demand to reduce carbon dioxide emissions, PV technology is also gaining popularity as a mainstream form of electricity generation. Some tens of thousands of systems are currently in use yet this number is insignificant compared to the vast potential that exists for PV as an energy source.
 +
 
 +
Photovoltaic modules provide an independent, reliable electrical power source at the point of use, making it particularly suited to remote locations. PV systems are technically viable and, with the recent reduction in production costs and increase in conversion efficiencies, can be economically feasible for many applications.
 +
 
 +
<center>
 +
 
 +
[[Image:Photovoltaic01.jpg]]<br /> Figure 1: Array of PV Panels<br />
 +
 
 +
</center><blockquote>
 +
 
 +
© Smail Khennas/Practical Action
 +
 
 +
</blockquote>
 +
 
 +
<br /> The use of PV electricity in developing countries
 +
 
 +
The majority of the world's developing countries is found within the tropics and hence have ample sources of solar insolation (the total energy per unit area received from the sun). The tropical regions also benefit from having a small seasonal variation of solar insolation, even during the rainy season, which means that, unlike northern industrial countries, solar energy can be harnessed economically throughout the year.
 +
 
 +
Currently, there is a fairly high uptake of solar technology in developing countries. The chart below (Figure 2) shows the status of the PV technology worldwide.
  
−
<div class="booktext">
+
<center>
  
−
Sugar cane must be crushed to extract the juice. The crushing process must break up the hard nodes of the cane and flatten the stems. The juice is collected, filtered and sometimes treated and then boiled to drive off the excess water. The dried cane residue (bagasse) is often used as fuel for this process. The remaining liquid is allowed to set into a solid mass known as jaggery, gur, chancaca or panela. (Gur is used in the rest of this document.)
+
[[Image:Photovoltaic02.jpg]]<br /> Figure 2: PV module use by region
  
−
</div>
+
</center></div>
  
−
==Yields==
+
==Technical==
  
 
<div class="booktext">
 
<div class="booktext">
  
−
The yield of gur from sugar cane depends mostly on the quality of the cane and the efficiency of the extraction of juice. The table below gives some extreme values.
+
The nature and availability of solar radiation
  
−
<div align="left">
+
Solar radiation arrives on the surface of the earth at a maximum power density of approximately 1 kilowatt per metre squared (kWm<sup>-2</sup>). The actual usable radiation component varies depending on geographical location, cloud cover, hours of sunlight each day, etc. In reality, the solar flux density (same as power density) varies between 250 and 2500 kilowatt hours per metre squared per year (kWhm<sup>-2</sup> per year). As might be expected the total solar radiation is highest at the equator, especially in sunny, desert areas.
  
−
{| border="1" cellpadding="5"
+
Solar radiation arrives at the earth's outer atmosphere in the form of a direct beam. This light is then partially scattered by cloud, smog, dust or other atmospheric phenomenon (see Figure 3 below). We therefore receive solar radiation either as ''direct'' radiation or scattered or ''diffuse'' radiation, the ratio depending on the atmospheric conditions. Both direct and diffuse components of radiation are useful, the only distinction between the two being that diffuse radiation cannot be concentrated for use.
−
|- valign="top"
 
−
| valign="top" |
 
−
'''High quality cane'''
 
−
| valign="top" |
 
−
'''Poor quality cane'''
 
−
|- valign="top"
 
−
| valign="top" |
 
−
Juice per 100kg of cane
 
−
| valign="top" |
 
−
50kg
 
−
| valign="top" |
 
−
40kg
 
−
|- valign="top"
 
−
| valign="top" |
 
−
% sugar in juice
 
−
| valign="top" |
 
−
22
 
−
| valign="top" |
 
−
17
 
−
|- valign="top"
 
−
| valign="top" |
 
−
Gur per 100kg of cane
 
−
| valign="top" |
 
−
10kg
 
−
| valign="top" |
 
−
7kg
 
−
|}
 
  
−
</div>
+
<center>
  
−
High quality cane has a good juice content with high sugar levels (20%+). Poor quality cane or cane that has been harvested early may have similar juice content but the sugar levels will be reduced.
+
[[Image:Photovoltaic03.gif]]<br /> Figure 3: Direct and Diffuse Solar Radiation
  
−
The efficiency with which juice can be extracted from the cane is limited by the technology used. The simple three roller crushers used by most artisanal producers will never extract more than 50kg of juice from each 100kg of cane.
+
</center>
  
−
Yields are also improved by careful control of the boiling process. Boiling should be completed as rapidly as possible and the conditions kept as clean as possible.
+
The geometry of earth, sun and collector panel
  
−
</div>
+
The earth revolves around the sun with its axis tilted at an angle of 23.5 degrees. It is this tilt that gives rise to the seasons. The strength of solar flux density is dependent upon the angle at which it strikes the earth's surface, and so, as this angle changes during the yearly cycle, so the solar insolation changes. Thus, in northern countries, in the depths of winter, the sun will be low in the sky to the south, or may not even be seen at all in arctic regions. The radiation strikes the earth's surface obliquely and solar gain (solar yield) is low. If we are using a solar photovoltaic panel to capture the sun's energy then the orientation of this panel is also critical to the amount of energy we will capture. The relationship is complex and only with sophisticated tracking systems can the maximum energy be extracted for any given location.
  
−
==Crushing==
+
The PV cell, modules and arrays
  
−
<div class="booktext">
+
When light falls on the active surface, the electrons in a solar cell become energised, in proportion to the intensity and spectral distribution (wavelength distribution) of the light. When their energy level exceeds a certain point a potential difference is established across the cell. This is then capable of driving a current through an external load.
  
−
Most artisanal sugar producers use a simple crusher consisting of three metal rollers. This is driven by either animal or diesel power. Figures 1 and 2 show both types in operation in Bangladesh. A crusher driven by a single ox can be expected to process around 50kg of cane per hour. A 5HP diesel set could increase this to around 300kg per hour. In these pictures the rollers are set vertically; many machines have horizontal rollers. Suppliers of this machinery are given at the end of this technical brief.
+
All modern, commercial PV devices use silicon as the base material, mainly as monocrystalline or multi-crystalline cells, but more recently also in amorphous form. Other materials such as copper indium diselenide and cadmium telluride are being developed with the aim of reducing costs and improving efficiencies. A mono-crystalline silicon cell is made from a thin wafer of a high purity silicon crystal, doped with a minute quantity of boron. Phosphorus is diffused into the active surface of the wafer. At the front electrical contact is made by a metallic grid; at the back contact usually covers the whole surface. An antireflective coating is applied to the front surface. Typical cell size is about 15 cms diameter. The process of producing efficient solar cells is costly due to the use of expensive pure silicon and the energy consumed, but as materials technology improves costs are slowly dropping making PV technology more attractive.
  
 
<center>
 
<center>
  
−
[[Image:p01.jpg]]<br /> Figure 1: Animal powered crusher ©Neil Cooper/Practical Action
+
[p04.jpg [[Image:Photovoltaic04.jpg]]]<br /> Figure 4: PV price trends
  
 
</center>
 
</center>
  
−
Important points to remember during crushing are:<br />
+
Cost has been the major barrier to the widespread uptake of PV technology. Cost of PV modules is usually given in terms of Peak Watt (Wp), which is the power rating of the panel at peak conditions - that is at 1kWm<sup>-2</sup> irradiance at 25°C.
 +
 
 +
Solar cells are interconnected in series and in parallel to achieve the desired operating voltage and current. They are then protected by encapsulation between glass and a tough resin back. This is held together by a stainless steel or aluminium frame to form a ''module''. These modules, usually comprised of about 30 PV cells, form the basic building block of a ''solar array''. Modules may be connected in series or parallel to increase the voltage and current, and thus achieve the required solar array characteristics that will match the load. Typical module size is 50Wp and produces direct current electricity at 12V (for battery charging for example).
 +
 
 +
Commercially available modules fall into three types based on the solar cells used.<br />
  
 
<blockquote>
 
<blockquote>
  
−
• Cane must be crushed within 24 hours of being cut. After this time the sugar begins to 'invert' into different sugars that will not set solid.
+
• ''Mono-crystalline cell modules.'' The highest cell efficiencies of around 15% are obtained with these modules. The cells are cut from a mono-crystalline silicon crystal.
  
−
• Crushing efficiency is the most important factor in good sugar yields. Every possible amount of juice needs to be squeezed from the cane.
+
• ''Multi-crystalline cell modules''. The cell manufacturing process is lower in cost but cell efficiencies of only around 12% are achieved. A multi-crystalline cell is cut from a cast ingot of multi-crystalline silicon and is generally square in shape.
 +
 
 +
• ''Amorphous silicon modules.'' These are made from thin films of amorphous silicon where efficiency is much lower (6-9%) but the process uses less material. The potential for cost reduction is greatest for this type and much work has been carried out in recent years to develop amorphous silicon technology. Unlike monocrystalline and multi-crystalline cells, with amorphous silicon there is some degradation of power over time.
 +
 
 +
</blockquote>
 +
 
 +
<br /> An array can vary from one or two modules with an output of 10W or less, to a vast bank of several kilowatts or even megawatts.<br />
 +
 
 +
<blockquote>
 +
 
 +
• ''Flat plate arrays'', which are held fixed at a tilted angle and face towards the equator, are most common. The angle of tilt should be approximately equal to the angle of latitude for the site. A steeper angle increases the output in winter; a shallower angle - more output in summer. It should be at least 10 degrees to allow for rain runoff.
 +
 
 +
• ''Tracking arrays'' follow the path of the sun during the day and thus theoretically capture more sun. However, the increased complexity and cost of the equipment rarely makes it worthwhile.
 +
 
 +
• ''Mobile (portable) arrays'' can be of use if the equipment being operated is required in different locations such as with some lighting systems or small irrigation pumping systems.
  
 
</blockquote></div>
 
</blockquote></div>
  
−
==Juice treatment==
+
==Solar PV systems==
  
 
<div class="booktext">
 
<div class="booktext">
  
−
Juice should be filtered through a cloth before boiling in order to remove any solids such as dirt or particles of cane.
+
PV systems are most commonly used for stand-alone applications. They can be used to drive a load directly; water pumping is a good example - water is pumped during the hours of sunlight and stored for use; or a battery can be used to store power for use for lighting during the evening. If a battery charging system is used then electronic control apparatus will be needed to monitor the system. All the components other than the PV module are referred to as the balance-of-system (BOS) components. Below, in Figure 5, three possible configurations of stand-alone PV system are shown. Such systems can often be bought as kits and installed by semi-skilled labour. (Source: The Power Guide, ITDG Publishing 1994)
  
−
Large-scale sugar processors add lime to the juice in order to coagulate impurities which then settle out. (This is rarely done at the artisanal level.) The juice is then neutralised with sulphur dioxide. Small-scale producers add a variety of clarificants to the juice including wood ash. All of these have the effect of settling out impurities. Many producers also add 'Hydros' (sodium hydrogen sulphate) at the final stages of boiling. This releases sulphur dioxide into the juice and lightens the colour of the final product. (Note that a high sulphur content often remains in the final product.)
+
For correct sizing of PV systems, the user needs to estimate the demand on the system, as well as acquiring information about the solar insolation in the area (approximations can be made if no data is readily available). It is normally assumed that for each Wp of rated power the module should provide 0.85watt hours of energy for each kWhm<sup>-2</sup> per day of insolation (Hulscher 1994). Therefore if we consider a module rated at 200 Wp and the insolation for our site is 5 kWhm<sup>-2</sup> per day (typical value for tropical regions), then our system will produce 850Wh per day (that is 200 x 0.85 x 5 = 850).
 +
 
 +
Some systems use lenses or mirrors to concentrate direct solar radiation onto smaller areas of solar cells. As the power output is directly proportional to the solar power directed onto the PV cell, this method is useful for reducing the area required for collection. The cost of the concentrators, however, often offset the cost of savings made on reducing the size of the module.
  
 
<center>
 
<center>
  
−
[[Image:p02a.jpg]]<br /> Figure 2: A Diesel powered cane crusher with three vertical rollers in Bangladesh. © Neil Cooper
+
[[Image:Photovoltaic06.gif]]<br /> Figure 5: Common configurations of PV systems
 +
 
 +
</center>
 +
 
 +
Some benefits of photovoltaics<br />
 +
 
 +
<blockquote>
 +
 
 +
• No fuel requirements - In remote areas diesel or kerosene fuel supplies are erratic and often very expensive. The recurrent costs of operating and maintaining PV systems are small.
  
−
</center></div>
+
• Modular design - A solar array comprises individual PV modules, which can be connected to meet a particular demand.
 +
 
 +
• Reliability of PV modules - This has been shown to be significantly higher than that of diesel generators.
 +
 
 +
• Easy to maintain - Operation and routine maintenance requirements are simple.
 +
 
 +
• Long life - With no moving parts and all delicate surfaces protected, modules can be expected to provide power for 15 years or more.
 +
 
 +
• National economic benefits - Reliance on imported fuels such as coal and oil is reduced.
 +
 
 +
• Environmentally benign - There is no pollution through the use of a PV system - nor is there any heat or noise generated which could cause local discomfort. PV systems bring great improvements in the domestic environment when they replace other forms of lighting - kerosene lamps, for example.
 +
 
 +
</blockquote>
 +
 
 +
<br /> PV applications in lesser developed countries
 +
 
 +
''1. Rural electrification''<br />
 +
 
 +
<blockquote>
 +
 
 +
• lighting and power supplies for remote building (mosques, churches, temples etc farms, schools, mountain refuge huts) - low wattage fluorescent lighting is recommended
 +
 
 +
• power supplies for remote villages
 +
 
 +
• street lighting
  
−
==Juice boiling==
+
• individual house systems
  
−
<div class="booktext">
+
• battery charging
  
−
This is done in large pans over open fires or simple furnaces (see figure 3). The essential requirement is for clean pans and tools. Sediment settles to the bottom of the pan during boiling and is dredged out. Scum rises to the top and is skimmed off. (Both of these wastes can be fed to cattle.) A large pan such as that pictured in figure 3 would hold about 100kg of juice reducing to around 20kg of gur. The pans are usually made from galvanised mild steel sheets.
+
• mini grids
  
−
The end point of the boiling process is judged from experience; from the sight and sound of the boiling juice. Small samples can be removed to see if they set solid when cooled. For those with access to simple sugar measuring devices, this usually corresponds to a Brix (sugar content) of 90-95%.
+
</blockquote><center>
  
−
After removal from the heat, the pans of juice are usually stirred rapidly to incorporate air and promote an even crystallisation. The cooling juice is then poured into pots or moulds to set.
+
[[Image:Photovoltaic07.jpg]]<br /> Figure 6: PV can be used to power water pumping systems<br />
  
−
</div>
+
</center><blockquote>
  
−
==Cleanliness==
+
© Practical Action
  
−
<div class="booktext">
+
</blockquote>
  
−
Cleanliness is vital to the whole process. Once the juice has been heated, impurities will speed the 'inversion' of sugar and lead to reduced yields. All boiling pans and tools need to be thoroughly cleaned between uses.
+
<br />''2. Water pumping and treatment systems''<br />
  
−
<center>
+
<blockquote>
  
−
[[Image:p02b.jpg]]<br /> Figure 3: A simple open pan used for processing the juice extracted from the sugar cane. © Neil Cooper
+
• pumping for drinking water<br /> • pumping for irrigation<br /> • dewatering and drainage<br /> • ice production<br /> • saltwater desalination systems<br /> • water purification
  
−
</center></div>
+
</blockquote>
  
−
==Tools==
+
<br />''3. Health care systems''<br />
  
−
<div class="booktext">
+
<blockquote>
  
−
The tools required are very simple Filtration before boiling is done through a fine woven cloth. Scum is removed from the boiling juice by a simple perforated scoop on a long handle. Sediment is removed by scraping a stretched cloth along the bottom of the pan. Once the pan has been removed from the heat, a simple rake is used to stir the thickened juice.
+
• lighting in rural clinics<br /> • UHF transceivers between health centres<br /> • vaccine refrigeration<br /> • ice pack freezing for vaccine carriers<br /> • sterilises<br /> • blood storage refrigerators
  
−
</div>
+
</blockquote><center>
  
−
==Mass balance==
+
[p08.gif [[Image:Photovoltaic08.gif]]]<br /> Figure 7: PV is frequently used to power vaccine refrigeration in remote health centres
  
−
<div class="booktext">
+
</center>
  
−
For the technically minded, the weights of the gur, juice and cane can be related as follows:<br />
+
''4. Communications''<br />
  
 
<blockquote>
 
<blockquote>
  
−
<sub>[[Image:img000.gif]]</sub>
+
• radio repeaters<br /> • remote TV and radio receivers<br /> • remote weather measuring<br /> • mobile radios<br /> • rural telephone kiosks<br /> • data acquisition and transmission (for example, river levels and seismographs)
  
 
</blockquote>
 
</blockquote>
  
−
<br /> Typical figures would be:<br />
+
<br />''5. Transport aids''<br />
  
 
<blockquote>
 
<blockquote>
  
−
<sub>[[Image:img001.gif]]</sub>
+
• road sign lighting<br /> • railway crossings and signals<br /> • hazard and warning lights<br /> • navigation buoys<br /> • road markers
  
 
</blockquote>
 
</blockquote>
  
−
<br />''Brown Sugar'', Practical Action Technical Brief
+
<br />''6. Security systems''<br />
  
−
''Honey Processing'', Practical Action Technical Brief
+
<blockquote>
  
−
''Candy Production'', ITDG Food Chain No 22
+
• security lighting<br /> • remote alarm system<br /> • electric fences
  
−
''Cane Sugar''<nowiki>: The Small-scale Processing Option, R. Kaplinsky, IT Publications, 1989</nowiki>
+
</blockquote>
  
−
Sugar Cane: The Tropical Agriculturalist, R. Fauconnier, CTA/MacMillan, 1993
+
<br />''7. Miscellaneous''<br />
  
−
</div>
+
<blockquote>
  
 +
• ventilation systems<br /> • calculators<br /> • pumping and automated feeding systems on fish farms<br /> • solar water heater circulation pumps<br /> • boat/ship power<br /> • vehicle battery trickle chargers<br /> • earthquake monitoring systems<br /> • emergency power for disaster relief
  
 +
</blockquote></div>
  
−
==Crushing equipment manufacturers==
+
==Other issues==
  
 
<div class="booktext">
 
<div class="booktext">
  
−
Note: This is a selective list of suppliers and does not imply endorsement by Practical Action
+
Manufacture in developing countries
 +
 
 +
PV technology is sophisticated and the manufacturing plant is expensive. There is little scope for local manufacture in rural areas of developing countries, although some BOS components such as frameworks for mounting PV modules can be made in small workshops and will save on expensive transportation costs. There are however, large-scale manufacturers of PV modules working in developing countries. In India, for example, Central Electronics of Ghaziabad is not only the nation's largest PV producer, but are the fifth largest producer of monocrystalline silicon solar cells in the world (D.V. Gupta cited in Garg et al, 1997). There are over 60 companies in India alone producing solar cells, modules and systems.
 +
 
 +
Dissemination
  
 
<div align="left">
 
<div align="left">
  
−
{| cellpadding="5"
+
{| border="1" cellpadding="5"
 
|- valign="top"
 
|- valign="top"
 
| valign="top" |
 
| valign="top" |
−
CIMAG - Com E Ind de Maquinas Agricola<br /> Rua St Terezinha 1381<br /> 13970 ITAPIRA SP<br /> Brazil<br /> • A manual mill with a throughput of around 100 litres per hour. (More suitable for juice drinks than gur production.)
+
There is a vast scope for and potential for the use of PV technology in India. There are still over 90,000 villages in the country to be electrified. Recognising the importance of PV technology in the Indian context, the Government has been implementing a comprehensive programme covering R & D, demonstration, commercialisation and utilisation for more than 15 years.
−
| valign="top" |
+
 
−
Penagos Hermanos & CIA Ltda<br /> Apartado Aereo 689<br /> Bucaramanga<br /> Colombia<br /> • A vertical roll, animal powered crusher, capacity of 4-6 tonnes of cane per day. A horizontal roll 4.5kW (6hp) crusher with a throughput of 400kg of cane per hour.<br /> • Other models up to 1.7 tonnes per hour.
+
Among the elements of the action plan are the following aims:<br />
−
|- valign="top"
+
 
−
| valign="top" |
+
<blockquote>
−
Tanzania Engineering and Manufacture<br /> Design Organisation<br /> P O Box 6111<br /> Arusha<br /> Tanzania<br /> • Electrically powered 2.2kW (3hp) crusher with a capacity of 20 litres of juice per hour.
+
 
−
| valign="top" |
+
• deployment of 400,000 solar lanterns as a substitute for kerosene lanterns<br /> • rural electrification through PV systems covering 400 villages/hamlets<br /> • a special programme on water pumping systems<br /> • intensified R & D on technologies which can lead to a reduction in cost<br /> • commercialisation of PV systems for various applications by giving a market orientation to the programme and promoting manufacturing and related activities
−
Dias & Dias<br /> 690 Negombo Road<br /> Mabole<br /> Wattala<br /> Sri Lanka<br /> • 2hp and 6hp crushers with capacity up to around 400kg per hour.
+
 
 +
</blockquote>
 +
 
 +
<br /> As a result of these measures India is among the leading countries in the world in the development and use of PV technology.
 
|}
 
|}
  
−
</div><div align="left">
+
</div><blockquote>
 +
 
 +
Source: E.V.R. Sastry, cited in Garg et al, 1997.
 +
 
 +
</blockquote>
 +
 
 +
<br /> Hybrid systems
 +
 
 +
Solar PV systems can be used in conjunction with other energy technologies to provide an integrated, flexible system for remote power generation. These systems are referred to as hybrid systems. Common configurations of hybrid systems could include a solar PV array, wind generator and diesel generator set which would allow generation in all weather conditions. Such systems need careful planning.
 +
 
 +
Solar lanterns
 +
 
 +
A recent innovation in solar technology is the solar lantern. Originally designed for the outdoor leisure market in western countries, this simple lantern with a small PV module (5-10 watts) is extremely appropriate to use in rural areas of developing countries for replacing kerosene lamps. Cost is still a barrier, as is the potential for local manufacture, but there is enormous scope for widespread dissemination of a simple, robust solar lantern.
 +
 
 +
Micro grids or stand-alone
 +
 
 +
Solar PV technology is presently best suited to stand-alone applications but can also be used for providing power for small grid systems, with centralised power generation. As the cost of PV cell production drops, their use for medium scale electricity production is being adopted more widely. There is also scope for large-scale electricity production for such applications as peak power provision.
 +
 
 +
</div>
 +
 
 +
==Resources and references==
 +
 
 +
<div class="booktext">
 +
 
 +
H.P. Garg, D. Gouri, and R. Gupta: Renewable Energy Technologies. Indian Institute of technology and the British High Commission, 1997.
 +
 
 +
S. Karekezi and T. Ranja: Renewable Energy Technologies in Africa. AFREPREN/SEI/Zed Books, 1997.
 +
 
 +
T.B. Johansson, H. Kelly, A.K.N. Reddy and R.H. Williams: Renewable Energy - Sources for fuels and electricity. Island Press, 1993.
 +
 
 +
J. Twidell and T. Weir: Renewable Energy Resources. E & F.N. Spon, 1990.
  
−
{| cellpadding="5"
+
W. Hulscher and P. Fraenkel: The Power Guide - An international catalogue of small-scale energy equipment. ITDG Publishing, 1994.
−
|- valign="top"
+
 
−
| valign="top" |
+
A. Derrick, C. Francis and V. Bokalders: Solar Photovoltaic Products - A guide for development workers. IT Publications and IT Power, 1991.
−
Agro Machinery Ltd<br /> PO Box 3281<br /> Bush Rod Island<br /> Monrovia<br /> Liberia
+
 
−
| valign="top" |
+
J.P. Louineau, M. Dicko, P. Fraenkel, R. Barlow and V. Bokalders: Rural Lighting - A guide for development workers. IT Publications and The Stockholm Environment Institute, 1994.
−
P M Madurai Mudaliar, P M<br /> and Sang<br /> Madurai Mudalliar Road<br /> PO Box 7156<br /> BangaloreIndia
+
 
−
| valign="top" |
+
S. Roberts: Solar Electricity - A practical guide to designing and installing photovoltaic systems. Prentice Hall, 1991.
−
Nafees Industries<br /> Samundari Road<br /> Faisalbad<br /> Pakistan
+
 
−
|}
+
G. Foley: Photovoltaic Applications in Rural Areas of the Developing World. World Bank, 1995.
 +
 
 +
A. Cabraal, M. Cosgrave-Davies and L. Schaeffer: Best Practices for Photovoltaic Household Electrification Programs. World Bank, 1996.
 +
 
 +
</div>
 +
 
 +
==Internet addresses==
 +
 
 +
<div class="booktext">
 +
 
 +
Solarbuzz Inc.<br />http://www.solarbuzz.com
 +
 
 +
British Photovoltaic<br /> Association http://www.pv-uk.org.uk
 +
 
 +
International Centre for Application of Solar Energy<br />http://www.case.gov.au
 +
 
 +
International Energy Agency Photovoltaic Power Systems Programme<br />http://www.iea-pvps.org/
 +
 
 +
Ekomation Solar Energy Consultants, Netherlands<br />http://www.pvportal.com
 +
 
 +
Home Power Magazine<br />http://www.homepower.com/
 +
 
 +
U.S. National Centre for Photovoltaics<br />http://www.nrel.gov/ncpv
 +
 
 +
Centre for Renewable Energy and Sustainable Technology<br />http://www.solstice.crest.org
 +
 
 +
Independent site operated by ECOFYS BV, Utrecht, Netherlands<br />http://www.mysolar.com
 +
 
 +
ISES's World-wide Information System for Renewable Energy<br />http://www.wire.ises.org
 +
 
 +
</div>
 +
 
 +
==Manufacturers/Suppliers of photovoltaic products==
 +
 
 +
<div class="booktext">
 +
 
 +
Note: This is a selective list of suppliers and does not imply endorsement by Practical Action.
 +
 
 +
Solar systems
 +
 
 +
Siemens Bangladesh,<br /> Jiban Bian Tower, 12<sup>th</sup> Floor, 10 Dikusha<br /> Commercial Area, Dhaka 1000, Bangladesh<br /> Tel: +880 2 956 3734<br /> Fax: +880 2 956 3740<br /> Email: [mailto:sblpower@bangla.net sblpower@bangla.net]
 +
 
 +
Animatics Ltd.,<br /> Haile Selassie Avenue, P.O. Box 72011, Nairobi, Kenya<br /> Tel: +254 2 210 300<br /> Fax: +254 2 210 315
 +
 
 +
Lotus Energy Pvt. Ltd.,<br /> Bhatbhateni Dhunge Dhara, P.O. Box 9219, Kathmandu, Nepal<br /> Tel: +977 1 418 203<br /> Fax: +977 1 412 924<br /> Email: [mailto:info@lotusenergy.com info@lotusenergy.com]<br /> Web: http://www.lotusenergy.com
 +
 
 +
CIME Commercial S.A.,<br /> Av. Libertadores # 757, San Isidro, Lima 27, Peru<br /> Tel: +511 222 6083<br /> Fax: +511 222 6330
 +
 
 +
Link Intertrade (Private) Ltd.,<br /> 385C Old Kotte Road, Rajagiriya, Sri Lanka<br /> Tel: +94 1 873 211-2<br /> Fax: +94 1 867 952<br /> Email: [mailto:intertrade@link.lk intertrade@link.lk]
 +
 
 +
Solarman Co.,<br /> P.O. Box 11545, Khartoum, Sudan<br /> Tel: +249 11 472 337<br /> Fax: +249 11 473 138<br /> Email: [mailto:solarman29@hotmail.com solarman29@hotmail.com]
 +
 
 +
Alternative Technologies Pvt. Ltd.,<br /> 3 Canald Road, Graniteside, Harare, Mash Cent, Zimbabwe<br /> Tel: +263 4 781 972-7<br /> Fax: +263 4 775 264<br /> Email: [mailto:snakes@zambezi.net snakes@zambezi.net]
 +
 
 +
Kenital Solar Energy,<br /> Ngong Road, P.O. Box 19764, Nairobi, Kenya<br /> Tel: +254 2 715 960<br /> Fax: +254 2 718 959<br /> Email: [mailto:info@kenital.com info@kenital.com]<br /> Web: http://www.kenital.com
 +
 
 +
Wisdom Light Group (P) Ltd.,<br /> Gha/2, 178 Siphal-Kalopul, GPO Box 6921, Kathmandu, Nepal<br /> Tel: +977 1 483 154/5<br /> Fax: +977 1 482 154<br /> Email: [mailto:info@wisdomlight.com.np info@wisdomlight.com.np]<br /> Web: http://www.wisdomlight.com.np
 +
 
 +
Ferreyros,<br /> Av. Industrial 675-Lima, Peru<br /> Tel: +511 336 7070<br /> Fax: +511 336 8331<br /> Web: http://www.ferreyros.com.pe
 +
 
 +
Solar Power & Light Co. Ltd.,<br /> 10 Havelock Place, Colombo 5, Sri Lanka<br /> Tel: +94 1 688 730<br /> Fax: +94 1 686 307
 +
 
 +
U.T.E. Group of Companies,<br /> P.O. Box 2074, Khartoum, Sudan<br /> Tel: +249 11 70147<br /> Fax: +249 11 70147
 +
 
 +
Solamatics,<br /> 31 Edison Crescent, Graniteside, P.O. Box 2851, Harare, Zimbabwe<br /> Tel: +263 4 749 930<br /> Fax: +263 4 771 212<br /> Email: [mailto:mikem@mcdiarmid.co.zw mikem@mcdiarmid.co.zw]
 +
 
 +
Solar modules
 +
 
 +
Shell Solar<br /> Postbus 3049, 5700 JC, Helmond, Netherlands<br /> Tel: +31 492 50 86 08<br /> Fax: +31 492 50 86 00<br /> Email: [mailto:info@shellsolar.nl info@shellsolar.nl]<br /> Web: http://www.shellsolar.com
 +
 
 +
Sharp Photovoltaics Div<br /> 282-1 Hajikami, Shinjo-cho, Kita-Katsuragigun,<br /> Nara Prefecture 639-2198, Japan<br /> Tel: +81 745 63 3579<br /> Fax: +81 745 62 8253<br /> Email: [mailto:webmaster@sharp.co.jp webmaster@sharp.co.jp]<br /> Web: http://www.sharp.co.jp
 +
 
 +
BP Solar Headquarters<br /> 989 Corporate Drive, Linthicum, Maryland, MD 21090, USA<br /> Tel: +1 410 981 0240<br /> Email:<br /> Web: http://www.bpsolar.com
 +
 
 +
Bharat Heavy Electricals Ltd. (BHEL)<br /> Jeevan Tara Building, 5 Sansad Marg, New<br /> Delhi, 110001, India<br /> Tel: +91 11 334 7331<br /> Fax: +91 11 334 2769<br /> Email: [mailto:bhelsanchar@vsnl.com bhelsanchar@vsnl.com]<br /> Web: http://www.bhel.com
  
−
</div></div>
+
Angewandte Solar Energie (ASE) GmbH (now RWE Solutions)<br /> Industriestrasse 13, Alzenau, Germany D63755<br /> Tel: +49 (0)6023 91 1712<br /> Fax: +49 (0)6023 91 1700<br /> Email: [mailto:asesales@ase.tessag.com asesales@ase.tessag.com]<br /> Web: http://www.ase-international.com
  
−
=='''References and further reading'''==
+
Photowatt International SA (Part of Matrix Solar Technologies Inc.)<br /> 33 rue St. Honore, Z.I. Champfleuri,<br /> 38300 Bourgoin Jallieu, France<br /> Tel: +33 (0)474 93 80 20<br /> Fax: +33 (0)474 93 80 40<br /> Email: [mailto:marketing@photowatt.com marketing@photowatt.com]<br /> Web: http://www.matrixsolar.com
  
−
'''This Howtopedia entry was derived from the Practical Action Technical Brief ''Sugar Production from Sugar Cane''. <br />To look at the original document follow this link:  
+
Central Electronics Ltd. (CEL)<br /> 4 Industrial Area, Sahibabad, Uttar Pradesh 201010, India.<br /> Tel: +91 120 4771941, 4771910<br /> Fax: +91 120 4771843<br /> Email: [mailto:cel@celsolar.com cel@celsolar.com]<br /> Web: http://www.celsolar.com
−
http://www.practicalaction.org/?id=technical_briefs_food_processing
 
  
−
=='''Useful addresses'''==
+
'''Practical Action, The Schumacher Centre for Technology & Development'''<br />'''Bourton Hall, Bourton-on-Dunsmore, Rugby, Warwickshire CV23 9QZ, UK'''<br />'''Tel: +44 (0)1926 634400 Fax: +44(0)1926 634401'''<br />'''E-mail: [mailto:Infoserv@practicalaction.org.uk Infoserv@practicalaction.org.uk] Web: http://www.practicalaction.org'''
−
'''Practical Action'''
 
−
The Schumacher Centre for Technology & Development, Bourton on Dunsmore, RUGBY, CV23 9QZ, United Kingdom.<br />
 
−
'''Tel.:''' +44 (0) 1926 634400, '''Fax:''' +44 (0) 1926 634401
 
−
'''e-mail:'''practicalaction@practicalaction.org.uk '''web:'''www.practicalaction.org
 
−
<center>[[Image:Pa-logo-200x103.gif]]</center>
 
  
−
=='''Categories:'''==
+
'''Intermediate Technology Development Group Ltd Patron HRH -'''<br />'''The Prince of Wales, KG, KT, GCB'''<br />'''Company Reg. No 871954, England Reg. Charity No 247257 VAT No 241 5154 92'''<br />
−
[[category:Example]]
 
−
[[Category:Easy]] [[Category:Medium]] [[Category:Difficult]] [[Category:High Technology]] [[Category:Dangerous]]
 
−
[[Category:Less than 10 US$]] [[Category:Less than 50 US$]] [[Category:Between 50 and 200 US$]] [[Category:More than 200 US$]]
 
−
[[Category:One Person]] [[Category:Up to 5 Persons]] [[Category:More than 5 Persons]]
 
−
[[Category:Global Technology]] [[Category:Local Technology]] [[Category:Urban Environment]] [[Category:Montaneous Environment]] [[Category:Forest Environment]] [[Category:Temperate Climate]] [[Category:Tropical Climate]] [[Category:Arid Climate]] [[Category:Monsoon Climate]]
 
−
Category:Water]] [[Category:Energy]] [[Category:Agriculture]] [[Category:Pest control]]  [[Category:Soil]] [[Category:Forest]] [[Category:Food Processing]] [[Category:Health]] [[Category:Ideas]] [[Category:Small Business]] [[Category:Products]] [[Category:Construction]] [[Category:Transportation|Transportation]] [[Category:Community]] [[Category:Mechanics]] [[Category:Informatics]]
 
−
[[Category:Plastic container]] [[Category:Ashes]] [[Category:Oil]] [[Category:Garlic]]
 

Revision as of 11:26, 27 August 2006

Solar Photovoltaic Energy - Technical Brief

Introduction

Photovoltaic (PV) is a technology that converts sunlight directly into electricity. It was first observed in 1839 by the French scientist Becquerel who detected that when light was directed onto one side of a simple battery cell, the current generated could be increased. In the late 1950s, the space programme provided the impetus for the development of crystalline silicon solar cells; the first commercial production of PV modules for terrestrial applications began in 1953 with the introduction of automated PV production plants.

Today, PV systems have an important use in areas remote from an electricity grid where they provide power for water pumping, lighting, vaccine refrigeration, electrified livestock fencing, telecommunications and many other applications. With the global demand to reduce carbon dioxide emissions, PV technology is also gaining popularity as a mainstream form of electricity generation. Some tens of thousands of systems are currently in use yet this number is insignificant compared to the vast potential that exists for PV as an energy source.

Photovoltaic modules provide an independent, reliable electrical power source at the point of use, making it particularly suited to remote locations. PV systems are technically viable and, with the recent reduction in production costs and increase in conversion efficiencies, can be economically feasible for many applications.

Photovoltaic01.jpg
Figure 1: Array of PV Panels

© Smail Khennas/Practical Action


The use of PV electricity in developing countries

The majority of the world's developing countries is found within the tropics and hence have ample sources of solar insolation (the total energy per unit area received from the sun). The tropical regions also benefit from having a small seasonal variation of solar insolation, even during the rainy season, which means that, unlike northern industrial countries, solar energy can be harnessed economically throughout the year.

Currently, there is a fairly high uptake of solar technology in developing countries. The chart below (Figure 2) shows the status of the PV technology worldwide.

Photovoltaic02.jpg
Figure 2: PV module use by region

Technical

The nature and availability of solar radiation

Solar radiation arrives on the surface of the earth at a maximum power density of approximately 1 kilowatt per metre squared (kWm-2). The actual usable radiation component varies depending on geographical location, cloud cover, hours of sunlight each day, etc. In reality, the solar flux density (same as power density) varies between 250 and 2500 kilowatt hours per metre squared per year (kWhm-2 per year). As might be expected the total solar radiation is highest at the equator, especially in sunny, desert areas.

Solar radiation arrives at the earth's outer atmosphere in the form of a direct beam. This light is then partially scattered by cloud, smog, dust or other atmospheric phenomenon (see Figure 3 below). We therefore receive solar radiation either as direct radiation or scattered or diffuse radiation, the ratio depending on the atmospheric conditions. Both direct and diffuse components of radiation are useful, the only distinction between the two being that diffuse radiation cannot be concentrated for use.

Photovoltaic03.gif
Figure 3: Direct and Diffuse Solar Radiation

The geometry of earth, sun and collector panel

The earth revolves around the sun with its axis tilted at an angle of 23.5 degrees. It is this tilt that gives rise to the seasons. The strength of solar flux density is dependent upon the angle at which it strikes the earth's surface, and so, as this angle changes during the yearly cycle, so the solar insolation changes. Thus, in northern countries, in the depths of winter, the sun will be low in the sky to the south, or may not even be seen at all in arctic regions. The radiation strikes the earth's surface obliquely and solar gain (solar yield) is low. If we are using a solar photovoltaic panel to capture the sun's energy then the orientation of this panel is also critical to the amount of energy we will capture. The relationship is complex and only with sophisticated tracking systems can the maximum energy be extracted for any given location.

The PV cell, modules and arrays

When light falls on the active surface, the electrons in a solar cell become energised, in proportion to the intensity and spectral distribution (wavelength distribution) of the light. When their energy level exceeds a certain point a potential difference is established across the cell. This is then capable of driving a current through an external load.

All modern, commercial PV devices use silicon as the base material, mainly as monocrystalline or multi-crystalline cells, but more recently also in amorphous form. Other materials such as copper indium diselenide and cadmium telluride are being developed with the aim of reducing costs and improving efficiencies. A mono-crystalline silicon cell is made from a thin wafer of a high purity silicon crystal, doped with a minute quantity of boron. Phosphorus is diffused into the active surface of the wafer. At the front electrical contact is made by a metallic grid; at the back contact usually covers the whole surface. An antireflective coating is applied to the front surface. Typical cell size is about 15 cms diameter. The process of producing efficient solar cells is costly due to the use of expensive pure silicon and the energy consumed, but as materials technology improves costs are slowly dropping making PV technology more attractive.

[p04.jpg Photovoltaic04.jpg]
Figure 4: PV price trends

Cost has been the major barrier to the widespread uptake of PV technology. Cost of PV modules is usually given in terms of Peak Watt (Wp), which is the power rating of the panel at peak conditions - that is at 1kWm-2 irradiance at 25°C.

Solar cells are interconnected in series and in parallel to achieve the desired operating voltage and current. They are then protected by encapsulation between glass and a tough resin back. This is held together by a stainless steel or aluminium frame to form a module. These modules, usually comprised of about 30 PV cells, form the basic building block of a solar array. Modules may be connected in series or parallel to increase the voltage and current, and thus achieve the required solar array characteristics that will match the load. Typical module size is 50Wp and produces direct current electricity at 12V (for battery charging for example).

Commercially available modules fall into three types based on the solar cells used.

• Mono-crystalline cell modules. The highest cell efficiencies of around 15% are obtained with these modules. The cells are cut from a mono-crystalline silicon crystal.

• Multi-crystalline cell modules. The cell manufacturing process is lower in cost but cell efficiencies of only around 12% are achieved. A multi-crystalline cell is cut from a cast ingot of multi-crystalline silicon and is generally square in shape.

• Amorphous silicon modules. These are made from thin films of amorphous silicon where efficiency is much lower (6-9%) but the process uses less material. The potential for cost reduction is greatest for this type and much work has been carried out in recent years to develop amorphous silicon technology. Unlike monocrystalline and multi-crystalline cells, with amorphous silicon there is some degradation of power over time.


An array can vary from one or two modules with an output of 10W or less, to a vast bank of several kilowatts or even megawatts.

• Flat plate arrays, which are held fixed at a tilted angle and face towards the equator, are most common. The angle of tilt should be approximately equal to the angle of latitude for the site. A steeper angle increases the output in winter; a shallower angle - more output in summer. It should be at least 10 degrees to allow for rain runoff.

• Tracking arrays follow the path of the sun during the day and thus theoretically capture more sun. However, the increased complexity and cost of the equipment rarely makes it worthwhile.

• Mobile (portable) arrays can be of use if the equipment being operated is required in different locations such as with some lighting systems or small irrigation pumping systems.

Solar PV systems

PV systems are most commonly used for stand-alone applications. They can be used to drive a load directly; water pumping is a good example - water is pumped during the hours of sunlight and stored for use; or a battery can be used to store power for use for lighting during the evening. If a battery charging system is used then electronic control apparatus will be needed to monitor the system. All the components other than the PV module are referred to as the balance-of-system (BOS) components. Below, in Figure 5, three possible configurations of stand-alone PV system are shown. Such systems can often be bought as kits and installed by semi-skilled labour. (Source: The Power Guide, ITDG Publishing 1994)

For correct sizing of PV systems, the user needs to estimate the demand on the system, as well as acquiring information about the solar insolation in the area (approximations can be made if no data is readily available). It is normally assumed that for each Wp of rated power the module should provide 0.85watt hours of energy for each kWhm-2 per day of insolation (Hulscher 1994). Therefore if we consider a module rated at 200 Wp and the insolation for our site is 5 kWhm-2 per day (typical value for tropical regions), then our system will produce 850Wh per day (that is 200 x 0.85 x 5 = 850).

Some systems use lenses or mirrors to concentrate direct solar radiation onto smaller areas of solar cells. As the power output is directly proportional to the solar power directed onto the PV cell, this method is useful for reducing the area required for collection. The cost of the concentrators, however, often offset the cost of savings made on reducing the size of the module.

Photovoltaic06.gif
Figure 5: Common configurations of PV systems

Some benefits of photovoltaics

• No fuel requirements - In remote areas diesel or kerosene fuel supplies are erratic and often very expensive. The recurrent costs of operating and maintaining PV systems are small.

• Modular design - A solar array comprises individual PV modules, which can be connected to meet a particular demand.

• Reliability of PV modules - This has been shown to be significantly higher than that of diesel generators.

• Easy to maintain - Operation and routine maintenance requirements are simple.

• Long life - With no moving parts and all delicate surfaces protected, modules can be expected to provide power for 15 years or more.

• National economic benefits - Reliance on imported fuels such as coal and oil is reduced.

• Environmentally benign - There is no pollution through the use of a PV system - nor is there any heat or noise generated which could cause local discomfort. PV systems bring great improvements in the domestic environment when they replace other forms of lighting - kerosene lamps, for example.


PV applications in lesser developed countries

1. Rural electrification

• lighting and power supplies for remote building (mosques, churches, temples etc farms, schools, mountain refuge huts) - low wattage fluorescent lighting is recommended

• power supplies for remote villages

• street lighting

• individual house systems

• battery charging

• mini grids

Photovoltaic07.jpg
Figure 6: PV can be used to power water pumping systems

© Practical Action


2. Water pumping and treatment systems

• pumping for drinking water
• pumping for irrigation
• dewatering and drainage
• ice production
• saltwater desalination systems
• water purification


3. Health care systems

• lighting in rural clinics
• UHF transceivers between health centres
• vaccine refrigeration
• ice pack freezing for vaccine carriers
• sterilises
• blood storage refrigerators

[p08.gif Photovoltaic08.gif]
Figure 7: PV is frequently used to power vaccine refrigeration in remote health centres

4. Communications

• radio repeaters
• remote TV and radio receivers
• remote weather measuring
• mobile radios
• rural telephone kiosks
• data acquisition and transmission (for example, river levels and seismographs)


5. Transport aids

• road sign lighting
• railway crossings and signals
• hazard and warning lights
• navigation buoys
• road markers


6. Security systems

• security lighting
• remote alarm system
• electric fences


7. Miscellaneous

• ventilation systems
• calculators
• pumping and automated feeding systems on fish farms
• solar water heater circulation pumps
• boat/ship power
• vehicle battery trickle chargers
• earthquake monitoring systems
• emergency power for disaster relief

Other issues

Manufacture in developing countries

PV technology is sophisticated and the manufacturing plant is expensive. There is little scope for local manufacture in rural areas of developing countries, although some BOS components such as frameworks for mounting PV modules can be made in small workshops and will save on expensive transportation costs. There are however, large-scale manufacturers of PV modules working in developing countries. In India, for example, Central Electronics of Ghaziabad is not only the nation's largest PV producer, but are the fifth largest producer of monocrystalline silicon solar cells in the world (D.V. Gupta cited in Garg et al, 1997). There are over 60 companies in India alone producing solar cells, modules and systems.

Dissemination

There is a vast scope for and potential for the use of PV technology in India. There are still over 90,000 villages in the country to be electrified. Recognising the importance of PV technology in the Indian context, the Government has been implementing a comprehensive programme covering R & D, demonstration, commercialisation and utilisation for more than 15 years.

Among the elements of the action plan are the following aims:

• deployment of 400,000 solar lanterns as a substitute for kerosene lanterns
• rural electrification through PV systems covering 400 villages/hamlets
• a special programme on water pumping systems
• intensified R & D on technologies which can lead to a reduction in cost
• commercialisation of PV systems for various applications by giving a market orientation to the programme and promoting manufacturing and related activities


As a result of these measures India is among the leading countries in the world in the development and use of PV technology.

Source: E.V.R. Sastry, cited in Garg et al, 1997.


Hybrid systems

Solar PV systems can be used in conjunction with other energy technologies to provide an integrated, flexible system for remote power generation. These systems are referred to as hybrid systems. Common configurations of hybrid systems could include a solar PV array, wind generator and diesel generator set which would allow generation in all weather conditions. Such systems need careful planning.

Solar lanterns

A recent innovation in solar technology is the solar lantern. Originally designed for the outdoor leisure market in western countries, this simple lantern with a small PV module (5-10 watts) is extremely appropriate to use in rural areas of developing countries for replacing kerosene lamps. Cost is still a barrier, as is the potential for local manufacture, but there is enormous scope for widespread dissemination of a simple, robust solar lantern.

Micro grids or stand-alone

Solar PV technology is presently best suited to stand-alone applications but can also be used for providing power for small grid systems, with centralised power generation. As the cost of PV cell production drops, their use for medium scale electricity production is being adopted more widely. There is also scope for large-scale electricity production for such applications as peak power provision.

Resources and references

H.P. Garg, D. Gouri, and R. Gupta: Renewable Energy Technologies. Indian Institute of technology and the British High Commission, 1997.

S. Karekezi and T. Ranja: Renewable Energy Technologies in Africa. AFREPREN/SEI/Zed Books, 1997.

T.B. Johansson, H. Kelly, A.K.N. Reddy and R.H. Williams: Renewable Energy - Sources for fuels and electricity. Island Press, 1993.

J. Twidell and T. Weir: Renewable Energy Resources. E & F.N. Spon, 1990.

W. Hulscher and P. Fraenkel: The Power Guide - An international catalogue of small-scale energy equipment. ITDG Publishing, 1994.

A. Derrick, C. Francis and V. Bokalders: Solar Photovoltaic Products - A guide for development workers. IT Publications and IT Power, 1991.

J.P. Louineau, M. Dicko, P. Fraenkel, R. Barlow and V. Bokalders: Rural Lighting - A guide for development workers. IT Publications and The Stockholm Environment Institute, 1994.

S. Roberts: Solar Electricity - A practical guide to designing and installing photovoltaic systems. Prentice Hall, 1991.

G. Foley: Photovoltaic Applications in Rural Areas of the Developing World. World Bank, 1995.

A. Cabraal, M. Cosgrave-Davies and L. Schaeffer: Best Practices for Photovoltaic Household Electrification Programs. World Bank, 1996.

Internet addresses

Solarbuzz Inc.
http://www.solarbuzz.com

British Photovoltaic
Association http://www.pv-uk.org.uk

International Centre for Application of Solar Energy
http://www.case.gov.au

International Energy Agency Photovoltaic Power Systems Programme
http://www.iea-pvps.org/

Ekomation Solar Energy Consultants, Netherlands
http://www.pvportal.com

Home Power Magazine
http://www.homepower.com/

U.S. National Centre for Photovoltaics
http://www.nrel.gov/ncpv

Centre for Renewable Energy and Sustainable Technology
http://www.solstice.crest.org

Independent site operated by ECOFYS BV, Utrecht, Netherlands
http://www.mysolar.com

ISES's World-wide Information System for Renewable Energy
http://www.wire.ises.org

Manufacturers/Suppliers of photovoltaic products

Note: This is a selective list of suppliers and does not imply endorsement by Practical Action.

Solar systems

Siemens Bangladesh,
Jiban Bian Tower, 12th Floor, 10 Dikusha
Commercial Area, Dhaka 1000, Bangladesh
Tel: +880 2 956 3734
Fax: +880 2 956 3740
Email: sblpower@bangla.net

Animatics Ltd.,
Haile Selassie Avenue, P.O. Box 72011, Nairobi, Kenya
Tel: +254 2 210 300
Fax: +254 2 210 315

Lotus Energy Pvt. Ltd.,
Bhatbhateni Dhunge Dhara, P.O. Box 9219, Kathmandu, Nepal
Tel: +977 1 418 203
Fax: +977 1 412 924
Email: info@lotusenergy.com
Web: http://www.lotusenergy.com

CIME Commercial S.A.,
Av. Libertadores # 757, San Isidro, Lima 27, Peru
Tel: +511 222 6083
Fax: +511 222 6330

Link Intertrade (Private) Ltd.,
385C Old Kotte Road, Rajagiriya, Sri Lanka
Tel: +94 1 873 211-2
Fax: +94 1 867 952
Email: intertrade@link.lk

Solarman Co.,
P.O. Box 11545, Khartoum, Sudan
Tel: +249 11 472 337
Fax: +249 11 473 138
Email: solarman29@hotmail.com

Alternative Technologies Pvt. Ltd.,
3 Canald Road, Graniteside, Harare, Mash Cent, Zimbabwe
Tel: +263 4 781 972-7
Fax: +263 4 775 264
Email: snakes@zambezi.net

Kenital Solar Energy,
Ngong Road, P.O. Box 19764, Nairobi, Kenya
Tel: +254 2 715 960
Fax: +254 2 718 959
Email: info@kenital.com
Web: http://www.kenital.com

Wisdom Light Group (P) Ltd.,
Gha/2, 178 Siphal-Kalopul, GPO Box 6921, Kathmandu, Nepal
Tel: +977 1 483 154/5
Fax: +977 1 482 154
Email: info@wisdomlight.com.np
Web: http://www.wisdomlight.com.np

Ferreyros,
Av. Industrial 675-Lima, Peru
Tel: +511 336 7070
Fax: +511 336 8331
Web: http://www.ferreyros.com.pe

Solar Power & Light Co. Ltd.,
10 Havelock Place, Colombo 5, Sri Lanka
Tel: +94 1 688 730
Fax: +94 1 686 307

U.T.E. Group of Companies,
P.O. Box 2074, Khartoum, Sudan
Tel: +249 11 70147
Fax: +249 11 70147

Solamatics,
31 Edison Crescent, Graniteside, P.O. Box 2851, Harare, Zimbabwe
Tel: +263 4 749 930
Fax: +263 4 771 212
Email: mikem@mcdiarmid.co.zw

Solar modules

Shell Solar
Postbus 3049, 5700 JC, Helmond, Netherlands
Tel: +31 492 50 86 08
Fax: +31 492 50 86 00
Email: info@shellsolar.nl
Web: http://www.shellsolar.com

Sharp Photovoltaics Div
282-1 Hajikami, Shinjo-cho, Kita-Katsuragigun,
Nara Prefecture 639-2198, Japan
Tel: +81 745 63 3579
Fax: +81 745 62 8253
Email: webmaster@sharp.co.jp
Web: http://www.sharp.co.jp

BP Solar Headquarters
989 Corporate Drive, Linthicum, Maryland, MD 21090, USA
Tel: +1 410 981 0240
Email:
Web: http://www.bpsolar.com

Bharat Heavy Electricals Ltd. (BHEL)
Jeevan Tara Building, 5 Sansad Marg, New
Delhi, 110001, India
Tel: +91 11 334 7331
Fax: +91 11 334 2769
Email: bhelsanchar@vsnl.com
Web: http://www.bhel.com

Angewandte Solar Energie (ASE) GmbH (now RWE Solutions)
Industriestrasse 13, Alzenau, Germany D63755
Tel: +49 (0)6023 91 1712
Fax: +49 (0)6023 91 1700
Email: asesales@ase.tessag.com
Web: http://www.ase-international.com

Photowatt International SA (Part of Matrix Solar Technologies Inc.)
33 rue St. Honore, Z.I. Champfleuri,
38300 Bourgoin Jallieu, France
Tel: +33 (0)474 93 80 20
Fax: +33 (0)474 93 80 40
Email: marketing@photowatt.com
Web: http://www.matrixsolar.com

Central Electronics Ltd. (CEL)
4 Industrial Area, Sahibabad, Uttar Pradesh 201010, India.
Tel: +91 120 4771941, 4771910
Fax: +91 120 4771843
Email: cel@celsolar.com
Web: http://www.celsolar.com

Practical Action, The Schumacher Centre for Technology & Development
Bourton Hall, Bourton-on-Dunsmore, Rugby, Warwickshire CV23 9QZ, UK
Tel: +44 (0)1926 634400 Fax: +44(0)1926 634401
E-mail: Infoserv@practicalaction.org.uk Web: http://www.practicalaction.org

Intermediate Technology Development Group Ltd Patron HRH -
The Prince of Wales, KG, KT, GCB
Company Reg. No 871954, England Reg. Charity No 247257 VAT No 241 5154 92
Retrieved from "http://en.howtopedia.org/?title=How_to_Make_Sugar_from_Sugar_Cane&oldid=1885"