Difference between revisions of "What Are Reasonable Span of Various Materials"
From Howtopedia - english
HTP Petros (talk | contribs) |
HTP Petros (talk | contribs) |
||
Line 1: | Line 1: | ||
− | The allowable span which a carrier can have so that it will not collapse depends on three things: | + | The allowable span which a carrier can have so that it will not collapse depends on three things (for an overwiev see figure 1): |
<p>+ its cross-section geometry (see examples below in the geometry part)</p> | <p>+ its cross-section geometry (see examples below in the geometry part)</p> | ||
<p>+ its material (steel, wood or reinforced concrete)</p> | <p>+ its material (steel, wood or reinforced concrete)</p> | ||
− | <p>+ on how you will apply the load on it (is the weight in the middle or | + | <p>+ on how you will apply the load on it (is the weight in the middle of the carrier or at one side)</p> |
Remember: '''NEVER''' use concrete or similar materials like stone without reinforcements of steel or similar for a carrier! The possibility that it will colappse is almost certain! | Remember: '''NEVER''' use concrete or similar materials like stone without reinforcements of steel or similar for a carrier! The possibility that it will colappse is almost certain! | ||
<p>You can see an overview of a common problem involving a carrier as it would be used for a roofing or for hanging other loads for instance meat.</p> | <p>You can see an overview of a common problem involving a carrier as it would be used for a roofing or for hanging other loads for instance meat.</p> | ||
Line 11: | Line 11: | ||
− | [[Image:Uebrsicht Balken named.jpg|thumb|center|500px| | + | [[Image:Uebrsicht Balken named.jpg|thumb|center|500px|Figure 1: An overview of a the most common use of a carrier]] |
<p>--[[User:HTP Petros|HTP Petros]] 15:57, 13 January 2010 (UTC)</p> | <p>--[[User:HTP Petros|HTP Petros]] 15:57, 13 January 2010 (UTC)</p> |
Revision as of 17:22, 13 January 2010
The allowable span which a carrier can have so that it will not collapse depends on three things (for an overwiev see figure 1):
+ its cross-section geometry (see examples below in the geometry part)
+ its material (steel, wood or reinforced concrete)
+ on how you will apply the load on it (is the weight in the middle of the carrier or at one side)
Remember: NEVER use concrete or similar materials like stone without reinforcements of steel or similar for a carrier! The possibility that it will colappse is almost certain!
You can see an overview of a common problem involving a carrier as it would be used for a roofing or for hanging other loads for instance meat.
--HTP Petros 15:57, 13 January 2010 (UTC)