From Howtopedia - english
|
|
| (One intermediate revision by the same user not shown) |
| Line 1: |
Line 1: |
| − | The allowable span which a carrier can have so that it will not collapse depends on three things (for an overwiev see figure 1):
| |
| | | | |
| − | <p>+ its cross-section geometry (see examples below in the geometry part)</p>
| |
| − | <p>+ its material (steel, wood or reinforced concrete)</p>
| |
| − | <p>+ on how you will apply the load on it (is the weight in the middle of the carrier or at one side)</p>
| |
| − | Remember: '''NEVER''' use concrete or similar materials like stone without reinforcements of steel or similar for a carrier! The possibility that it will colappse is almost certain!
| |
| − | <p>You can see an overview of a common problem involving a carrier as it would be used for a roofing or for hanging other loads for instance meat.</p>
| |
| − |
| |
| − | Simplified carrier.jpg
| |
| − |
| |
| − |
| |
| − |
| |
| − | [[Image:Uebrsicht Balken named.jpg|thumb|center|500px|Figure 1: An overview of a the most common use of a carrier]]
| |
| − |
| |
| − | [[Image:Simplified carrier.jpg|thumb|center|500px|Figure 2: An overview of the most common carrier crossections]]
| |
| − |
| |
| − | [[Image:Profiles.jpg|thumb|center|500px|Figure 2: An overview of the most common carrier crossections]]
| |
| − | <p>to be CONTINUED........ Notice: The author accepts no responsibility for the safety of a construction or the correctness of the article </p>
| |
| − |
| |
| − | <p>--[[User:HTP Petros|HTP Petros]] 15:57, 13 January 2010 (UTC)</p>
| |
Latest revision as of 09:17, 14 January 2010
