How to Build the ARTI Compact Biogas Digestor

Short Description

• Problem: cooking fuel, waste disposal, unefficiency of traditionnal biogas cattle dung digestors
• Idea:A very efficient process of biomethanisation thanks to high calorie content of the waste used for the bacteriological digestion. The system is usable by any household.
• Difficulty:Construction: easy to medium, use: easy
• Price Range: about 100$ with new material
• Material Needeed: 2 plastic water tanks, one of 1cubic meter, the other of 0,75 cubic meter content, flexible pipe, stable horizontal base, frame to stop the gastank rise, inlet and outlet fittings
• Geographic Area: global, in temperate to cold climates, the plant has to be heated
• Competencies: simple plumbing skills
• How Many people? 2
• How Long does it take? from three to max. ten hours construction time, two weeks to start the methane production

Glossary:

Biomethanisation: occures through the anaerobic digestion of organic material through bacterias. The bacterias digest the calories contained in the organic material and release methan and carbon dioxid. Feedstock: organic material that will be fed regulary in the digestor to be digested in methane. Slurry: mixture of decomposing feedstock and water.

Comparaison with existing systems

The current process of biomethanisation, which uses feedstocks like: cattle dung, human faeces, distillery effluents etc is highly inefficient because the nutricionally available calories and nutritive value of these substances is quite low, as the calories present in the food have already been used by the cattle, humans or fermentation processes.

Common sense says that the energy output of a system must matched with the input. Methane has a calorific value of 11000 kcal/kg. To obtein this such a high methan output, the methanisation process should receive a correspondingly high calorific input.

Nowadays, municipal solid waste (MSW) is also being used as a source of methane. Food rests in the MSW have a relatively high caloric content, but in the current process, called the two phase fermentation system, the waste is first subject to an aerobic fermentation in order to reduce ist bulk, and only then, having very few calories left in it, being fed to the anaerobic methane digesters.

Such traditionnal biogas production systems operationg on human or animal faeces or with the two-phase fermentation system produce approximatively 10 kg of methan per tonne of feedstock in a process completed in 40 days. The duration can be shortened using thermophilic bacterias but the input to output ratio remains unchanged.

Further, the use of cattle dung as the feedstock for methanisation is a main factor limiting the widespread use of domestic methane plants in India for the supply for household fuel: -the present domestic biogas plant requires 40kg cattle dung per day, ( from 6 to 8 heads of cattle) -because the dung has a retention time of 40 days, the size of the plant is large -the servicing of the plant requires the daily mixing of the dung with water to make it feedstock, filling it into the biogas plant and the disposal of about 80 to 100 liters of effluent slurry, which is a source of complain from the users. Restrictions of space, money, unsufficient animals to feed the plant and maintance problems stop many farmers and households from this technology.

ARTI New Biogas technology

Arti developped in 2003 a new Biogas technology which uses high calorie feedstock, consisting of starchy or sugary material. This high calorie content in the material allowes to produce 250 kg of methane per tonne of feedstock (on dry weight basis) in a process time of one day.

Which means that a household needing methane to cook 3 meals a day will need to feed its domestic plant with 2 kg of material per day. The material used can be so varied as: waste grain, seed of any plant species, oilcake of non edible oilseeds, non edible or non marketable fruits ( wild species of ficus, overripe mangos and bananas...) food rests, even the flour swept from the floor of a flour mill can be used as feedstock for the biogas plant.

Because of the small quantities and the speed of the process, size, maintainence and price are drastically reduced: -The gas holder of the plant has a capacity of 750 to 1000 litres which is enough to cook two meals for a familly of 5. - the user feeds daily the digestor with one kilo mashed feedstock mixed with some water in the morning and one kg in the evening, - the total daily effluent produced by this system is 10 litres, that can be watered to the garden plants or recycled in the digestor. -the new biogas plant ranges between Rs. 5000 and Rs. 6000 (112 to 135$, 2007) corresponding to the price of two in another fitting plastic water tanks, a concrete base and the necessary frame and plumbing ware.

How to build the new compact biogas plant:

-the apparatus itself consists of: Two plastic water tanks sold in sanitary and plumbing ware shops. One should be bigger than the other so that once the top of each tank will be cut open, the smaller one can fit in the bigger one and move like a „telescope“. The bigger tank (or drum) serves as a digestor, and the smaller, placed upside down in the bigger one serves as the gas holder. -The inlet pipe: a 3cm diameter flexible pipe, a bit longer than the height of the tank, is fitted at the bottom side of the bigger tank. At the free extremity of the pipe , a funnel is fixed to facilitate the pouring of the quite fluid feedstock material. The pipe with the funnel are to be fixed loosely to the top of the tank, in upright position. This pipe will also serve as a purge in case of necessity. -the effluent outlet is fitted to the upper part of the bigger tank and determines the maximum level of matter in the tank. -The gas outlet is fitted to the smaller inner tank and directed toward a gas stove. -a frame structure is build above the tanks to stop the gas tank to fall open when too filled. It is possible to put a last on the upper tank to increase pressure in the tank.

Methane burns with a blue flame, without producing any smoke or soot. It is therefore an environmentally friendly cooking system. Thus, introduction of the new efficient, compact biogas system would not only help urban households in utilizing their domestic wet waste, but also help prevent millions of premature deaths of women and children in rural households due to indoor air pollution caused by smoke and soot from burning fuelwood in traditional chulhas. This markedly impacts the health of the people in the kitchen (mainly women) positively. Further reductions in pollution and energy use arise from not having to transport LPG cylinders to be re-filled. The small amount of solid residue produced by the biogas plant makes a good fertiliser. Methane, on the contrary of propane, is lighter than air, there is therefore little risk of an accumulation and explosion in case of a leak. In hot regions, the system could be placed in a garden or on an accessible roof terrasse, for it needs a relatively warm temperature.

How to start the process?

The system is first loaded with a slurry of about 20 kg of cattle dung, waste flour or starch and water.: The bacterias present in the intestine and consequently in the dung of the cattle are the bacterias that will break down the organic material in methane and carbon dioxid. After a waiting time of about 2 weeks, the gas should start to be emitted. Test the gas by burning it: if it is combustible, you can start adding high calorie material. Feedstock: daily ,1 kg to 1,5 kg mashed feedstock mixed with 10 to 15 litres water in the morning and one kg in the evening. The feed can be waste flour, vegetable residues, waste food, fruit peelings and rotten fruit. Feedstock with large lumps (more than 20 mm) can be broken up with a food blender. Hand and pedal powered food blenders are being developed, for when electricity is not available. Oil cake, left over from oil-pressing, is another useful feedstock. Even rhizomes of banana, canna, nutgrass, non-edible seeds (e.g. Leucaena, Sesbania, tamarind, mango kernels) and spoilt grain serve as excellent feedstock material.

The digester should provides a steady supply of gas, typically 250 g of gas per day from 1 kg (dry matter) of feed.

Is it possible to use the compact biogas system in urban environments?

The compact biogas plant technology developed by ARTI readily accepts highly digestible organic materials such kitchen waste as feedstock and can easily blend into the urban lifestyle. A single plant produces sufficient biogas to at least halve the use of LPG or kerosene for cooking in a household, as well as a small amount of solid residue which can be used as fertiliser. ARTI’s compact biogas plant could be replicated anywhere where there is the space for the plant, and the temperature is sufficiently high.

In villages, food waste was traditionally fed to animals or left by the side of the road for animals to devour. People continue to do this in cities but there are fewer animals to consume it. The result is that smelly, rotting food attracts flies and rats. This new biodigestor technology offers a solution not just for domestic waste disposal, but also for collective disposal of community waste.

What kind of problems can occure?

A biogas plant can become acidic

and fail if it is over-fed, and this is a particular challenge with a plant using highly digestible organic materials. If this happens, the plant can be recovered by ceasing feeding and then building up the feed rate slowly. This problem was more common with the early smaller systems (0.5 or 0.75 m3) than with the later, larger systems.

How to Purchasing your own compact biogas system? Cost & Payment

Samuchit Enviro-Tech (SET) Pvt. Ltd., a company set up by members of ARTI, is in charge of commercialising the ARTI compact biogas system. ARTI’s trained technicians install the biogas plants using locally available plastic tanks (commonly used for water storage) and a plumbing kit supplied by SET. SET also supplies a single burned biogas stove made of cast iron, and a gas cock. This set, consisting of the plumbing kit and a single burner biogas stove, costs Rs. 2350 (M.R.P. inclusive of taxes and transport anywhere in India). The total estimated cost of the compact biogas system for a typical household (around 1000-1500 lit capacity) is about Rs.10,000, but the actual cost may vary based on local prices of plastic tanks and local labour costs.

If you feel like experimenting...

Basically, as the bacterias present in the intestine and consequently in the dung of the cattle are the bacterias that will break down the organic material in methane and carbon dioxid, as a consequence, anything that the cattle is able to digest will be producing methane. Maybe are there other bacterias, present in the intestine of other animals, that would be able to digest other types of organic material: let’s think about insects for exemple?

Success story

The design and development of this simple, yet powerful technology for the people, has won ARTI the Ashden Award for Sustainable Energy 2006 in the Food Security category. From 2003 onwards, about 1000 compact biogas plants have been so far installed by ARTI's trained personnel – covering both rural as well as urban households in Maharashtra. At least 1000 more plants have been installed by enthusiasts and hobbyists, using the instruction VCD widely produced and distributed by ARTI (http://www.arti-india.org/content/view/50/48/ for more information on our VCDs and booklets). In Maharashtra, several independent producers have copied the design for themselves. These existing plants are a useful advertisement for the advantages of biogas systems and consequently about 30-50 plants are now being installed per month. The authority in Pune has decided it can no longer dispose city waste in a landfill because of lack of space, and local officials are therefore strongly encouraging the use of biogas plants to dispose of food waste. Local council offices have set up demonstration plants, which use local food wastes and provide gas for making tea for local officials and their visitors.

References and Bibliography

This article was transcribed from the ARTI booklet, „Rural Technologies developed by Arti“ Appropriate Rural Technology Institute,(ARTI) Pune.

Links

www.arti-india.org

Contacts

Appropriate Rural Technology Institute (ARTI) 2nd Floor Maninee Apartments, Survey No.13, Dhayarigaon Pune Maharashtra 411 041 India arti_pune@vsnl.net 00 91-20-24390348 / 24392284 00 91-20-24390348

Installation and technical support: Samuchit Enviro-Tech Pvt. Ltd. Flat No. 6, Ekta Park Co-op Hsg Society, Behind Nirmitee Showroom, Law College Road, Erandwana, Pune – 411004. Tel. and Fax: 020-25460138 Email: samuchit@vsnl.net

Related articles

Biomass (Technical Brief) Biomass and Liquid Biofuel (Technical Brief)