What to Do in Case of Cholera Epidemy
- 1 How to prevent CHOLERA
- 2 How to identify CHOLERA
- 3 How to treat CHOLERA
- 4 Rehydration solution
- 5 How to make water safe for drinking and cooking
- 6 1. Settle and filter the water
- 7 2. Boil or add bleach. If you have no bleach, use lemon or lime.=
- 8 Keep water containers clean.
- 9 Categories
How to prevent CHOLERA
Cholera can be prevented through careful sanitation, careful use and treatment of water before drinking or cooking, and careful handling of food.
- Build emergency sanitation facilities at least 30 meters from any water source.
- Ensure a water point nearby so that people can wash their hands carefully after using the toilet (For exemple a Tippy-Tap)
- Always wash hands with soap after using the toilet.
- Always wash hands with soap before cooking.
- Never use a common towel to dry your hands, use a clean cloth or sun dry.
to transport a person with diarrhea
- If possible, put the legs of the patient in a big plastic bag that it reaches the waist. This allows to collect the stool.
- If you must use a vehicle to transport the sick person, line the seats and the floor of the car with large bags or a thick plastic.
- Collect patient's vomiting into plastic bags. Give it to the staff at the hospital for proper disposal.
- Burn everything that was contaminated and that cannot be desinfected.
- Dead people should be buried far from water sources. Same for dead animals. Always wash carefully after handling.
Preparing an Emergency Pit Latrine
In an emergency, while a more permanent latrine is being built, a simple pit can be dug as a temporary solution for the disposal of human excreta. It should have a depth of at least 1/2 meter, and be at least 20meters from a well or other source of drinking water. Where possible, the pit should be at least 6 meters from the nearest house .It should not be located uphill from the water source or dug in marshy soil. The bottom of the pit should never penetrate the groundwater table. After each use, a layer of soil should be laid down in the pit. In an area affected by cholera, the pit should also be coated each day with a layer of unslaked lime.
- Do not drink untreated water.
- Treat water using at least 2 methods:
Filtering through fabric, sand or other material and boiling Filtering through fabric, sand or other material and adding lime or lemon Filtering through fabric, sand or other material and adding chlorine
- Keep water containers clean and do not put hands in drinking water.
- Cook food thoroughly and eat it while it is hot.
- Fish and shellfish are a major cause of cholera: only eat them if they are well-cooked.
- Do not mix cooked foods with raw foods like salads or relishes.
- Exclude infected persons from handling food.
- Wash vegetables and fruit in treated water before use, or peel them if there is no water.
- Discourage the habit of several people eating together from a communal food container.
How to identify CHOLERA
signs and symptoms
Cholera is a severe form of diarrhea caused by bacteria in water. Cholera spreads very quickly in emergency condition and can lead to many deaths. The symptoms of cholera are:
- Diarrhea “like rice water” in very large quantities
- Leg cramps
Diarrhea and vomiting can lead very quickly to severe dehydration and shock. Without treatment, death can occur within hours. To help everyone in the community identify and prevent cholera, everyone should participate in the following activities:
- Water purification
- Safe food preparation
- Learning to make oral rehydration formula
To prevent cholera and avoid panic in the community, information is essential.
By knowing what cholera is and how to prevent it, everyone can be protected.
How to treat CHOLERA
The most important treatment for cholera is oral rehydration. Except in severe cases, antibiotics will not help at all. When a person has watery diarrhea or diarrhea and vomiting, do not wait for signs of dehydration. Act quickly. Give lots of liquids to drink such as a thin cereal porridge or gruel, soup, water or rehydration drink. Keep giving food. As soon as the sick person can eat, give frequent feedings of foods he likes. To babies, keep giving breast milk often — and before other drinks. Rehydration drink helps to prevent or treat dehydration. It does not cure cholera or diarrhea, but may give enough time for the illness to go away by itself.
Hygien is very important while in contact with a person contaminated!
Below are two ways of making rehydration drink. If you can, add half a cup of fruit juice, coconut water, or mashed ripe banana to either drink. These contain potassium, a mineral which helps a sick person accept more food and drink. Give the person sips of this drink every 5 minutes, day and night, until he begins to urinate normally. A large person needs 3 or more liters a day. A small child usually needs at least 1 liter a day, or 1 glass for each watery stool. Keep giving the drink often, and in small sips. Even if the person vomits, not all of the drink will be vomited.
Rehydration drink made with powdered cereal and salt.
(Powdered rice is best. But you can use finely ground maize, wheat fl our, sorghum, or cooked and mashed potatoes.) In 1 liter of clean WATER put half of a level teaspoon of SALT, and 8 heaping teaspoons of powdered CEREAL. Boil for 5 to 7 minutes to form a liquid gruel or watery porridge. Cool the drink quickly and begin to give it to the sick person. CAUTION: Taste the drink each time before you give it to make sure that it has not spoiled. Cereal drinks can spoil within a few hours in hot weather.
Rehydration drink made with sugar and salt.
(You can use raw, brown sugar or molasses instead of white sugar.) In 1 liter of clean WATER put half of a level teaspoon of SALT, and 8 level teaspoons of SUGAR. Mix well. CAUTION: Before adding the sugar, taste the drink and be sure it is less salty than tears.
How to make water safe for drinking and cooking
Surface water and water from leaking pipes and open cisterns and wells may be contaminated with cholera and other germs. This water should be carefully treated before drinking! There are different ways to treat surface water or other water sources that are likely to be contaminated. The quickest ways are boiling, bleaching, and adding lime or lemon. No matter how it is treated it should be settled and filtered first, or the treatment may not work.
1. Settle and filter the water
- Let water settle until solids have settled out and water is more-or-less clear.
- Pour water through a filter made of clean fabric or a sand and charcoal filter.
To use a fabric filter
Fold at least 4 times, a clean cotton sari cloth preferably an old cloth, and stretch or tie it over the mouth of a clean jar. Pour water slowly into the jar through the cloth. After using the cloth, wash it and leave it in the sun to dry, or disinfect the cloth with bleach to kill germs.
To use a sand filter
There are various design of very efficient sand filters, but a very simple emergency filter would be the following:
- Make a few holes at the bottom of a clean container (the container should be as big as possible).
- Fill the bottom of the container with a layer of clean peeble, round river stones, a layer of clean small stones, a layer of gravel and a thick layer of clean sand (more than half of the container should be filled with sand, the thicker the sand layer, the better).
- Put a large stone on top to avoid disturbing the top layer of sand.
- Let water flow throuh it till the water is clear.
- Boil the clear filtered water, as this type of filter has to be more precisely done and needs to function up to three weeks and kept wet continously before it is able to remove all bacterias.
- The water can be passed through a second container with gravel size crushed wood charcoal to remove bad taste, but the charcoal should be changed often as there can be bacterial growth in the charcoal.
2. Boil or add bleach. If you have no bleach, use lemon or lime.=
- Bring water to a rapid boil for at least 1 minute.
- Pour water into a clean container to cool.
Use of bleach
Because household bleach is the most common form of chlorine, this chart shows how to disinfect water with household bleach. Household bleach may have different amounts of chlorine. Most common are 3.5% and 5%. The easiest way to measure the amount of bleach needed is to first make a mother solution (about 1% chlorine) First prepare the mother solution: 1. Add 1 cup of bleach to a clean, empty beer bottle. 2. Fill the bottle with clean water. 3. Shake the bottle for 30 seconds. 4. Let it sit for 30 minutes. Your mother solution is ready. and then add this solution to the water you want to disinfect.
- For 1 liter (or 1 quart) ->3 drops
- For 1 gallon (or 4 liters) ->12 drops
- For 5 gallons (or 20 liter) ->1 teaspoon
- For a (200 liter barrel ) -> 10 teaspoons
Add these amounts of the mother solution to clear water and wait at least 30 minutes before drinking the water. If the water is cloudy, you need twice as much of the bleach solution.
Use of lime or lemon
(! This method will not kill all germs and bacteria !, but is safer than no treatment at all and can prevent many cases of cholera)
- Add the juice of 1 lime or lemon per liter of drinking water, to kill cholera germs.
- Pour water into a clean container.
Keep water containers clean.
- Make sure the water storage container stays clean!
- Do not put dirty containers, hands or anything else in the water container.
- Do not drink from the jar or from the water container
- Pour water off directly into clean cups for use.