Difference between revisions of "Pedal-Powered Electricity Generator"
From Howtopedia - english
Line 29: | Line 29: | ||
'''Step 3: Generator belt'''<br> | '''Step 3: Generator belt'''<br> | ||
− | The wheel shown in the picture above is a 26 inch one. To fit the generator between the wheel and the ground a A78 (78 inch circumference) belt was used.<br> | + | The wheel shown in the picture above is a 26 inch one. To fit the generator between the wheel and the ground a A78 (78 inch circumference) belt was used. Now everything is ready to convert mechanical energy to electrical energy.<br> |
==References and Further Reading== | ==References and Further Reading== |
Revision as of 22:13, 22 February 2010
Contents
Short Description
- Problem: Lack of wind, water or fuel to power a generator.
- Idea: Combine a chair and the back end of a bike to power a generator
- Difficulty: Difficult
- Price Range: Depends on the material's availability
- Material Needed: Chair, the back end of a bike, generator, belt, poles, welding device
- How Many people? 1-2
Concept
How to Build the Pedal-Powered Electricity Generator
Step 1: Connect the bicycle rear with the chair.
Use an adjustable pole if you want to adjust the pedal powered generator to different leg length.
Use a socket to provide more portability.
Do not weld directly onto the crank housing.
The final crank position should be a couple of inches above the seat.
Step 2: The base for the generator.
The generator will be placed on the bottom in the front of the wheel and its base can be made of office chair parts.
Step 3: Generator belt
The wheel shown in the picture above is a 26 inch one. To fit the generator between the wheel and the ground a A78 (78 inch circumference) belt was used. Now everything is ready to convert mechanical energy to electrical energy.
References and Further Reading
Related Articles