What Are Reasonable Spans of Carriers made of Various Materials

At this part a simple example of a carrier which connects one wall of the house with the other as can be seen in figure 1 is presented. For simplicity the carrier is loaded in its middle with a sandbag. Exactly the same loading would be present if the roof was mounted at this point.

Figure 1: An overview of a the most common use of a carrier

For reasons of simplifying future calculations and understanding the above figure 1 is remade and represented as in figure 2

Figure 2: A simplified figure of the previous overview to allow easier calculations

For the start it is Importatnt to remember that the allowable span which a carrier can have so that it will not collapse depends on three important factors:

+ its cross-section geometry (see examples in figure 3 below)

+ its material (steel, wood or reinforced concrete)

+ on how you will apply the load on it (is the weight in the middle of the carrier or at an other point)

Remember: NEVER use concrete or similar materials without reinforcements of steel or similar for a carrier! The possibility that it will colappse is almost certain!

Figure 3: An overview of the most common carrier crossections

Notice that from the above mentioned cross-section geometrys the best choice conserning the weight of the carrier and its resistance to the loading in our case would be to use the "H-shaped" cross-section as for instance one can find in railroad tracks. Never the less it is more probable that you will find tree stems or wooden carriers with round or rectangular cross-section that also do the job very good.

to be CONTINUED........ Notice: The author accepts no responsibility for the safety of a construction or the correctness of the article

--HTP Petros 15:57, 13 January 2010 (UTC)